Open semitrailer with tarp

Wiese*Gabelstaplertransporter mit Auffahrrampe

Wiese 3-axle, multi-level semi-trailer in a special design
with access ramp for forklift transport
Type: WGT-36-CS-SR
Weights:
Total weight: 36,000 kg / 39,000 kg, Fifth-wheel load: 12,000 kg
Axle assembly: 24,000 kg / 27,000 kg, Tare weight approx.: 12,500 kg according to DIN + 5%
Dimensions:
Fifth-wheel height: 1,150 mm
Length, upper deck i.d.: 4,100 mm
Length, lower deck i.d.: 9,500 mm
Width i.d.: 2,470 mm
Interior height, upper deck approx.: 2,600 mm
Interior height, lower deck approx.: 3,100 mm
Overall height: 4,000 mm
Chassis:
Frame construction in steel welded structure, consisting of longitudinal beams and continuous cross members, wear plate 8 mm, kingpin height approx. 200 mm incl. floor
- incl. approach slope and ramp attachment
- Outer frame as a perforated frame for optimized load securing
Axles:
- 3 x 9,000 kg low-maintenance SAF-Eco axles, drum-braked
- Air suspension with lifting and lowering system
- A-axle as a lift axle
C-axle as a friction-steered trailing axle, axle distance 1,310/1,810
Floor:
- Fifth-wheel platform with 30 mm sieve-print floor, waterproof glued
- Lower deck with 40 mm sieve-print floor, waterproof glued
- Floor with anti-slip surface
- Designed for high surface load and high point load
- Floor suitable for forklift traffic
Load securing:
- Perforated floor frame profile, tensile force per eyelet 5000 kg, as well as 10 pairs of recessed lashing points for load securing
- Additionally, 4 reinforced lashing points in 8 t design, multi x rail in the lower deck
Superstructure:
- Front wall with rounded corners, front wall at full height with a central front wall support
- Rear portal in reinforced design incl. preparation for access ramp
- 2 aluminum combination side rails with running rails for sliding tarpaulin, sliding beams and sliding curtains, sliding tarpaulin to be opened from rear to front for roof loading
- 3 center posts per side in automatic design
Tensioning mechanism of the sliding tarpaulin mounted on the rear cross members
- Sliding tarpaulin with quick-release function on the front wall
Access ramp:
Type: WFB 25 S
Load capacity: 25,000 kg as an access ramp
Platform length approx.: 5,600 mm / 3,100 mm + 2,500 mm
Design:
as a 2-part extension ramp
4 hydraulic cylinders for opening and closing the ramp
2 hydraulic cylinders for extending the ramp
Platform made of steel in a 2-part design, with a fixed part sealing the rear portal and an extension part
Running surface made of galvanized heavy-duty grating, foldable supports on the platform for ramp use, the ramp seals the rear portal, incl. rubber seals, ramp design incl. angle reduction, i.e. the fixed ramp section can be partially loaded and raised, rear support hydraulic
Unit/ramp drive:
electric-hydraulic motor with compact, low-noise unit, unit housing made of stainless steel
Electrical supply 24 volts via charging cable to the towing unit, NATO cable
Mounting, hydraulic unit inside, in front of the front wall
Ramp control by means of wireless remote control, additional operation at the control panel available
Emergency operation by means of hand pump available
Tires
Axle Position Dimension Manufacturer Model Type Rim Tread depth
1 Left Outer 235/75R17.5 143/141J All-season Steel 8.0 mm
1 Left Inner 235/75R17.5 143/141J All-season Steel 8.0 mm
1 Right Inner 235/75R17.5 143/141J All-season Steel 10.0 mm
1 Right Outer 235/75R17.5 143/141J All-season Steel 10.0 mm
2 Left Outer 235/75R17.5 143/141J All-season Steel 7.0 mm
Bwjdj Ah A R Ispfx Af Aew
2 Left Inner 235/

L'annuncio è stato tradotto automaticamente e possono essersi verificati degli errori di traduzione.