Trailer with working platformMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Luftfed.
Trailer with working platform
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Luftfed.
Prezzo fisso più IVA
47.950 €
(57.060 € lordo)
Anno di produzione
2026
Condizione
Nuovo
Ubicazione
Egestorf 

Dati essenziali
- Denominazione:
- Trailer with working platform
- Produttore:
- MÜLLER-MITTELTAL
- Anno di produzione:
- 2026
- Condizione:
- nuovo
Prezzo e posizione
Prezzo fisso più IVA
47.950 €
(57.060 € lordo)
- Ubicazione:
- Eichenstich 12, 21272 Egestorf, Deutschland

Chiamata
Dettagli tecnici
Dimensioni e peso
Peso complessivo:
30.000 kg
Peso massimo di carico:
23.700 kg
Assi e ruote
Configurazione degli assi:
3 assi
Dettagli dell'offerta
- ID dell'annuncio:
- A104-33-108
- numero di riferimento:
- 59021
- Aggiornamento:
- ultimo aggiornamento il 29.09.2026
Descrizione
T3 Profi 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes
Blsdel Tpwyopfx Ahaep
----Axles:
* 3 x 11 to BPW Eco axles
----Suspension:
* Air suspension with raising and lowering function, controlled by an RtR valve
----Drawbar:
* Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Smart-Board as an information tool
* LED tail lights 12/24 V
* Rotating beacon (removable) at the rear
* 15-pin power connector
----General components:
* Lateral underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front axle: closed plastic fenders, rear axle: straight, galvanized steel mudguards, each with splash protection
* Reflective contour strips on the sides and rear
* Folding cover (hot-dip galvanized) for the tool box in the turntable platform
----Low-bed platform:
* 4 lashing points on each side with simultaneous 2 to lashing capacity
* 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope)
* Extension boards stored in the center of the loading area
* Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the sides
----Load securing (La-Si package):
* 2 lashing points (6.4 to) at the front left & right on the main frame of the turntable platform
* 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - in the corners 13.4 to, otherwise 10 to.
----Excavator arm rest:
* Over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 to lashing rings on the sides in the excavator arm rest)
----Loading area:
* Over the turntable: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope)
----Loading height:
* Unloaded approx. 1,070 mm
* Loaded approx. 910 mm
----Tires:
* 235/75 R 17.5
----Paint finish:
* Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized
* Axles, turntable, air tank, etc. painted in a black shade
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available for immediate delivery from Egestorf, near the A7 motorway
L'annuncio è stato tradotto automaticamente e possono essersi verificati degli errori di traduzione.
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes
Blsdel Tpwyopfx Ahaep
----Axles:
* 3 x 11 to BPW Eco axles
----Suspension:
* Air suspension with raising and lowering function, controlled by an RtR valve
----Drawbar:
* Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Smart-Board as an information tool
* LED tail lights 12/24 V
* Rotating beacon (removable) at the rear
* 15-pin power connector
----General components:
* Lateral underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front axle: closed plastic fenders, rear axle: straight, galvanized steel mudguards, each with splash protection
* Reflective contour strips on the sides and rear
* Folding cover (hot-dip galvanized) for the tool box in the turntable platform
----Low-bed platform:
* 4 lashing points on each side with simultaneous 2 to lashing capacity
* 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope)
* Extension boards stored in the center of the loading area
* Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the sides
----Load securing (La-Si package):
* 2 lashing points (6.4 to) at the front left & right on the main frame of the turntable platform
* 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - in the corners 13.4 to, otherwise 10 to.
----Excavator arm rest:
* Over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 to lashing rings on the sides in the excavator arm rest)
----Loading area:
* Over the turntable: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope)
----Loading height:
* Unloaded approx. 1,070 mm
* Loaded approx. 910 mm
----Tires:
* 235/75 R 17.5
----Paint finish:
* Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized
* Axles, turntable, air tank, etc. painted in a black shade
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available for immediate delivery from Egestorf, near the A7 motorway
L'annuncio è stato tradotto automaticamente e possono essersi verificati degli errori di traduzione.
Venditore
Nota: Registrati gratuitamente o accedi, per visualizzare tutte le informazioni.
Registrato da: 2001
165 annunci online
Invia richiesta
Telefono & Fax
+49 40 33... mostra
Potresti essere interessato anche a questi annunci.
Riuscito
Il tuo messaggio è stato inviato.
Annuncio economico
Egestorf
1.274 km
Rimorchio a pianale ribassato
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Luftfed.
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Luftfed.
Riuscito
Il tuo messaggio è stato inviato.
Annuncio economico
Egestorf
1.274 km
Rimorchio a pianale ribassato
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Il tuo annuncio è stato cancellato con successo
Si è verificato un errore

















































































































